• jiayicloth heeft een update geplaatst 2 maanden, 4 weken geleden

    Conveyor Belt when slips causes significant damage to the drive pulley and the belt. Such damages are not only expensive to repair, but also time consuming and cause enormous loss due to down time.
    The life span of a conveyor system primarily depends on its being suitably equipped for the specific application and the standard of servicing and maintenance. The conveyor systems often have to perform in the most difficult conditions.For example rain and sludge, which cause slippage between the conveyor belt and pulleys because of the friction co-efficient between the two going down very low.
    Pulley Laggings, with specially developed rubber materials and their patterned surfaces have proved to be very effective in water shedding, preventing material build up and controlling belt slippage.
    Diamond Profile black lagging is ideal for small diameter pulleys on systems with black conveyor belt.
    It prevents belt from slippage (in particular when water is present) and increase the drive traction of the pulley.
    For Drive pulleys, a friction lagging should always be used.
    The type of friction lagging should be selected by the customer according to its application.
    Availability
    Widths ranging from 1000mm – 2000mm
    Thickness: 8mm – 12mm.
    Length: 10M-20M
    Technical Data: Tensile Strength:7MPA Density:1.45g/cc Elongation:300%
    Other specification available as special order.Pulley Lagging
    website:http://www.zolayrubber.com/pulley-lagging/